Factory Default Fix: How To Reset Dahua Nvr To

The NVR will reboot and boot up into the , where you can begin fresh configuration. Method 2: Using the Hardware Reset Button (Hard Reset)

While continuing to hold the button, .

Go to Setting (or Operation ) > System (or System Maintain ). Select Default: Click on the Default tab. Initiate Reset: Click Factory Reset or Factory Default . how to reset dahua nvr to factory default

There are two main ways to reset a Dahua NVR to factory defaults: using the (if you have the password) or using the physical reset button (if you lost the password).

Resetting a Dahua NVR (Network Video Recorder) to factory defaults is a common troubleshooting step to clear forgotten passwords, resolve software glitches, or prepare the device for a new setup. There are three primary methods: , via the web interface , and using the hardware reset button (if available). The NVR will reboot and boot up into

If you still have access to the NVR’s login credentials, this is the safest and most efficient method.

Completely wipes all settings and uninitializes the device, returning it to a "brand new" state. Select Factory Default and click OK . Select Default: Click on the Default tab

✅ : No need to physically touch the NVR. ❌ Cons : Requires prior email/SQ setup; otherwise need to contact Dahua support with proof of ownership.

Click Yes or OK when prompted. The unit will reboot and return to the initial setup wizard. Method 2: Physical Hardware Reset (If Password is Unknown)

Use this method if you know the admin password and can access the main menu.