M100 Resetter - Epson

Most printer resetter tools are detected by Windows Defender or third-party antivirus software as a "virus" or "malware." This is usually a caused by the software’s ability to modify hardware firmware. You must disable your antivirus for about 10-15 minutes while using the tool.

Before you download and use the resetter, there are two critical things you must do: epson m100 resetter

The resetter essentially tells the printer’s logic board: "The pad has been replaced/checked, please reset the counter to zero." Most printer resetter tools are detected by Windows

If you see these signs, the waste ink counter has reached its limit. Resetting the counter without checking the physical pad

Resetting the counter without checking the physical pad is dangerous. If the pad is truly full of ink and you reset the counter, the printer will keep pumping ink into a saturated sponge. This can lead to ink leaking out of the bottom of the printer and damaging your desk or floor.

The Epson M100 Resetter (often referred to as an Adjustment Program) is a software utility used to reset the internal counter of the printer.

During printing, the printer performs routine head cleaning cycles. This excess ink is flushed into a waste ink pad located inside the machine. Epson programs their printers to stop working once a certain amount of ink is estimated to be in the pad to prevent potential overflow and damage.