Lay the futon face down on the floor. Most models come folded in half like a book. Open it flat so the underside is facing up. 2. Retrieve the Hardware
This step introduces the "M8 Hex Bolt." These are the heavy lifters of the futon. Here, the provided Allen wrench (or hex key) becomes an extension of the hand. The assembler must thread the bolt through the hinge and the frame, adding a washer and a nut on the other side. The trick is not to tighten these bolts fully until all are in place. This allows for "play" or movement, helping to align the holes that might be slightly off-center. Once all bolts are threaded, a systematic tightening—in a crisscross or star pattern—ensures the weight is distributed evenly across the joint.
If your model includes a center support leg, install it now. This is crucial for preventing the frame from sagging or snapping. walmart mainstays futon instructions
Before you begin, clear a large workspace—ideally on a carpet or rug to prevent scratching the upholstery.
Most Mainstays futon models utilize a metal frame with wooden armrests or a fully metal skeleton. Assuming the popular "mixed material" model, the assembler must first prepare the sides. Lay the futon face down on the floor
Most Mainstays futons store the legs and hardware in a zippered pocket underneath the seat.
Locate the zippered underside. Open it to find the legs, bolts, washers, and the provided Allen key. If any pieces are missing, contact Walmart customer service before proceeding. 3. Attach the Legs Align the legs with the pre-drilled holes at each corner. The assembler must thread the bolt through the
Most Mainstays futons have a limit between 400 lbs and 600 lbs. Avoid jumping on the unit to protect the internal springs or foam. ❓ Troubleshooting Common Issues