| Wire Origin | Wire Color (Typical) | Connects To | | :--- | :--- | :--- | | | Red / Brown (Phase) | Receiver Input (L) | | Mains Supply | Blue (Neutral) | Receiver Input (N) | | Mains Supply | Green/Yellow (Earth) | Motor Earth (via connector) | | Motor | Brown | Receiver Output (Up) | | Motor | Black / Grey | Receiver Output (Down) | | Motor | Blue | Receiver Output (N) | | Motor | Green/Yellow | Mains Earth (via connector) |
Mains 230V AC │ ├── L (Brown) ──► Telco Receiver Input L ├── N (Blue) ───► Telco Receiver Input N └── PE ─────────► Terminal block
Pour brancher un volet roulant équipé d'un système à 4 fils, le raccordement s'effectue généralement sur une centrale de commande (comme la Teleco Simple ) qui gère la réception radio pour la télécommande. 1. Identification des fils (Standard Teleco) branchement volet roulant 4 fils teleco
| Component | Terminal | Wire Color | Destination | |-----------|----------|------------|-------------| | Mains | L (Phase) | Brown | Telco L | | Mains | N (Neutral) | Blue | Telco N | | Mains | PE | Yellow/Green | Earth block | | Telco receiver | Com | Blue | Motor Blue | | Telco receiver | Up | Brown | Motor Brown | | Telco receiver | Down | Black | Motor Black | | Telco receiver | PE | Yellow/Green | Motor Earth |
Comment faire le branchement et le raccordement de son volet roulant | Wire Origin | Wire Color (Typical) |
Connect the wires from the motor to the Output terminals of the receiver:
| Receiver Terminal | Wire Color | Function | |------------------|------------|----------| | (Common) | Blue | Motor neutral | | ↑ (Up / Open) | Brown | Motor up phase | | ↓ (Down / Close) | Black | Motor down phase | | PE (if present) | Yellow/Green | Earth | Pour des ressources supplémentaires
Coupez toujours le courant au disjoncteur général avant toute manipulation électrique. Pour des ressources supplémentaires, consultez le site officiel Teleco Automation.