Use this method if the TV turns on and you can access the menu.
: The TV should automatically reboot into the "First Time Installation" menu once the update is finished. Manual Update (Menu Method) 17mb130s firmware
The standby light flashes rapidly, but the TV never displays a picture. Use this method if the TV turns on
openocd -f interface/jlink.cfg -f target/stm32f1x.cfg -c "program 17mb130s_fw_v3.2.hex verify reset exit" 17mb130s firmware
: Ensure the TV is not unplugged during the blinking phase, as this will result in a permanent mainboard failure.
The most common reason users seek 17MB130S firmware is to "revive" a TV that has become unresponsive. Common symptoms of firmware corruption include: