The Hilti TE 72 is a heavy-duty, corded electro-pneumatic rotary hammer drill designed for high-performance drilling and chiseling in concrete, masonry, and rock. It is classified as a (drill-only, hammer-drill, and chisel-only modes).
The following details cover the essential Hilti TE 72 specifications, features, and performance capabilities. Technical Performance Data
Note: The TE 72 is an older, discontinued model in Hilti’s TE series. It has been succeeded by models like the TE 70, TE 80, and more modern AVR (Active Vibration Reduction) units. However, many units remain in service. This guide is based on original technical data. hilti te 72 specifications
The Hilti TE 72 is a powerful and versatile rotary hammer drill that's designed for demanding applications in concrete, masonry, and other materials. Here are some key specifications:
The TE 72 uses the spline drive system – not SDS‑Max. Do not attempt to use SDS bits. The Hilti TE 72 is a heavy-duty, corded
Hilti made a TE‑F to SDS‑Max adapter (optional, check availability). However, using an adapter reduces impact energy transfer.
| Parameter | Specification | |------------------------|--------------------------------------| | | 1300 W | | Impact energy | 12 Joules (single impact) | | Impact frequency | 2,600 bpm (blows per minute) | | No-load speed | 320 rpm | | Tool holder | Hilti TE‑F (Spline drive) | | Weight (tool only) | 7.8 kg (17.2 lbs) | | Length | 545 mm (21.5 inches) | | Height | 255 mm (10 inches) | | Cord length | 4 m (13.1 ft) (removable Hilti cord) | | Protection class | II (double insulated) | | Operating temp. | -15°C to +50°C (5°F to 122°F) | Technical Performance Data Note: The TE 72 is
Mechanical slip clutch helps protect the operator if a bit binds in rebar.