The screen in front of Kai blinked once, then settled into a steady, surgical blue. DC60 008 Version 4.0 A — the text was crisp, almost smug, in the corner of the display.
Version 4.0 A often features better heat dissipation and moisture resistance compared to earlier 2.0 or 3.0 versions. dc60 008 version 4.0 a
| Symptom | Likely Cause | Solution | | :--- | :--- | :--- | | | No Power | Check 24VAC/DC supply to the module. | | TX LED solid, RX off | Baud Rate Mismatch | Verify the DC60 baud rate matches the router/master device. | | Device not seen by BMS | MAC Address Conflict | Change the MAC address. Check for duplicate IDs on the trunk. | | Intermittent Data | Wiring Noise / Termination | Ensure the shield is grounded at one end only. Enable termination resistors at end nodes. | | v4.0 Specific Glitches | Firmware mismatch with IQ | Ensure the host IQ controller firmware is compatible with the DC60 v4.0 adapter. | The screen in front of Kai blinked once,
Features RCA composite (yellow, red, white) and S-Video inputs. Getting Started with Version 4.0A | Symptom | Likely Cause | Solution |