L2tp Server Mikrotik: |work|

traffic from VPN to LAN and internet:

/ip firewall nat add chain=srcnat src-address=192.168.100.0/24 action=masquerade comment="VPN NAT"

Adjust the IP pool, secret, and password to your needs: l2tp server mikrotik

Now, enable the server itself and enforce IPsec for security. , as L2TP alone does not provide encryption. Go to: PPP > Interface > L2TP Server Enabled: Check Default Profile: l2tp-profile Use IPsec: yes

To allow multiple users, just add more /ppp secret entries. traffic from VPN to LAN and internet: /ip

Ensure your "Accept" rules for ports 500, 4500, and 1701 are placed above any "Drop All" rules in your Filter list.

To enable the L2TP server on your MikroTik router, follow these steps: Ensure your "Accept" rules for ports 500, 4500,

This gives connected clients IPs from 192.168.100.2 to .100.

By following this setup, you gain a secure, encrypted tunnel that allows you to access local files and services as if you were sitting directly in the office or at home. AI responses may include mistakes. Learn more