Reset L4260 Portable 【1080p – UHD】

No. A soft reset or factory reset does not drain the ink. However, the printer keeps an electronic count of how much ink has been used. Only a full hardware reset (Method 3) alters the ink level counters.

Is your Epson EcoTank L4260 acting up? Whether you are seeing a "Service Required" message, experiencing network connectivity issues, or simply want to restore the printer to its out-of-the-box state, a reset is often the best solution.

| Symptom | Likely Issue | Solution | | :--- | :--- | :--- | | | Paper jam or carriage obstruction | Open the scanner lid, check for torn paper, and gently move the print head. | | All lights flashing | Fatal error (e.g., waste pad full) | Perform a waste ink pad reset (see Section 4) or seek service. | | Printer offline after reset | Network settings erased | Reconnect to Wi-Fi via the printer's Settings > Network Settings > Wi-Fi Setup Wizard . | | No ink flow after refill | Air bubble in ink line | Run a Power Cleaning cycle (Maintenance > Power Cleaning - uses a lot of ink). | reset l4260

Make sure you are holding it down for a full 10 seconds. If the printer is currently reporting an error (like a paper jam), you must clear the physical error first before the button will work for a reset.

: Fully restores the printer to factory defaults. Select Yes to confirm. 3. Resetting "Ink Pad Needs Service" (Error E-11) Only a full hardware reset (Method 3) alters

Resets only Wi-Fi and ethernet configurations. Copy/Scan Settings: Resets specific function preferences.

printer and generate a diagnostic report, follow the steps for your specific goal below. 1. Generating a Network Status Report | Symptom | Likely Issue | Solution |

Contact Epson Support or an authorized service center. They will replace the waste ink pad and then use a special service utility to reset the counter. This costs a fee but ensures your printer is safe.

If you have tried a Soft Reset and a Factory Reset but the problem persists: